JW SteelCrafts
7.5-Inch Rasp Steel Bull Cutter Knife — Teal Marbled Resin Handle, Silver Pins, Lanyard Hole & Leather Sheath | JW Steel Crafts
7.5-Inch Rasp Steel Bull Cutter Knife — Teal Marbled Resin Handle, Silver Pins, Lanyard Hole & Leather Sheath | JW Steel Crafts
- Regular price
- Price: $139.00
- Regular price
- List Price: $190.00
- Sale price
- Price: $139.00
- Unit price
- per
- For Best Price, Call or Text us (971) 345-4432
- 30-Day Easy Returns
- Low Price Guarantee + No Sales Tax
Couldn't load pickup availability
SKU: sku-44589966164028
PRODUCT DESCRIPTION
This rasp steel bull cutter knife measures approximately 7.5 inches overall with a 4-inch sheepsfoot blade and a 3.5-inch teal marbled resin handle. The blade is forged from dense high-carbon rasp steel and hand-finished to a hardness of 55–58 HRC. The rasp texture runs across the blade flat as a visible mark of the forging process. A leather sheath is included for safe carry and storage.
This is the only rasp steel bull cutter knife at JW Steel Crafts with a teal marbled resin handle, silver pins, and a lanyard hole in this configuration.
The History Behind This Blade
In the American cattle country of the 1800s, ranch hands and livestock workers carried a short, wide-bladed cutter as their everyday working tool. The bull cutter was built for one job: heavy, controlled cuts that a narrow blade could never handle. Farriers and stockmen ground their blades from old steel rasps, turning worn-out tools into reliable cutting knives. That rasp-steel tradition survives in every JW Steel Crafts bull cutter forged today.
Blade Performance
The blade is forged from solid rasp steel, a dense, high-carbon steel that holds a strong working edge through heavy daily use. The sheepsfoot profile keeps the cutting edge straight and flat for controlled push cuts through meat, joints, and tough ingredients. There is no belly curve to redirect force. Every stroke lands clean and direct. The hand-finished rasp texture across the blade surface is not a decorative finish.
It is the natural result of forging from rasp steel stock. Hardened to 55–58 HRC, the blade sits between flexible and brittle, tough enough for impact work, hard enough to hold an edge. Full tang construction runs the complete length of the teal resin handle and spreads weight evenly from blade tip to handle base. The balance point sits near the bolster, tipping weight toward the blade for cleaner chops without extra wrist force.
Handle Construction
The handle is shaped from teal marbled resin. The marbled pattern runs deep through the material it does not fade, chip, or peel through heavy use. Resin does not absorb moisture, does not swell in wet conditions, and holds its surface finish through outdoor and kitchen use equally well. Silver pins run through the handle to lock the scales firmly to the full tang. A lanyard hole sits at the base of the handle for cord attachment during outdoor carry or wall display. Bare-handed or gloved, the grip stays locked and firm through heavy chopping work.
Leather Sheath
The leather sheath protects the blade between uses and allows safe carry in a kit, bag, or camp pack. The blade seats fully with no movement. Draw is clean with one hand.
Best Used For
- Heavy meat prep, joint splitting, and thick cuts
- Camp cooking, ranch work, and outdoor food prep
- BBQ breakdown work before and after the smoke
- Collectors of rasp steel and working-style knives
- Gifting for hunters, camp cooks, and BBQ enthusiasts
Specifications
| Feature | Details |
|---|---|
| Overall Length | ~7.5 inches |
| Blade Length | 4 inches |
| Handle Length | 3.5 inches |
| Blade Steel | High-carbon rasp steel |
| Blade Hardness | 55–58 HRC |
| Blade Finish | Hand-finished rasp texture |
| Blade Profile | Sheepsfoot / bull cutter |
| Handle Material | Teal marbled resin |
| Pin Detail | Silver pins and lanyard hole |
| Construction | Full tang |
| Sheath | Leather sheath included |
Frequently Asked Questions
What is rasp steel and why is it used for this knife?
Rasp steel comes from hardened steel files and rasps. It is dense and high-carbon by nature, which makes it tough enough for impact cutting tasks and capable of holding a strong working edge at 55–58 HRC.
What is a sheepsfoot blade profile?
A sheepsfoot blade has a straight cutting edge and a spine that curves down to meet it at the tip. This keeps the full edge flat against the cutting surface for powerful, controlled push cuts with no wasted motion.
What is the lanyard hole for?
It lets you attach a cord for secure outdoor carry or hang the knife for display and wall storage.
How do I care for this knife?
Hand wash and dry straight after use. Apply food-safe mineral oil to the blade every few weeks. Store in the leather sheath in a dry place.
Let customers speak for us
I'm very pleased with this tent after having it for two years I've been in the rain I've been in the snow and it's held up pretty good but the cover that covers it did not hold up that good but the tent is perfect
Really enjoy the awning. Easy setup and got a little rain on the first trip. Easy to adjust for the run off. Very happy with the purchase!
I am one of the earliest customers Astrodome, I bought it and didn’t set it up for almost a year. By the time we set it up, we were blown away by the beauty of this space we purchased it on a mountain ledge in our glamping retreat in Lake County California two hours north of San as much as I love this space there are definitely some challenges with it in our location. It might work better than other locations, but we have had problems with the stakes, slipping and collapsing in the ground beneath and with the prevailing winds, it did stay up and it stays dry, even in tornadoes, but because the wind hits it from One Direction coming from the coast, this is definitely been a challenge for us we are going to try adding some weight inside it. The guests absolutely love this space keep in mind that with those skylights it’s going to get hot in the summertime but what’s nice is in the winter. It heats up almost passive solar. it’s also wonderful with a woodstove. A very cost effective alternative to a geodesic dome! If you want to experience it stay in ours, on Hipcamp.
I bought one of these at Scheels and absolutely love it. Great design, has everything you would ever need in a first aid/trauma/survival kit. Have one in all of my vehicles now. These guys truly thought of everything
A complete coverage of possibilities for my project and needs.
I love my new tent stove. Costumer service was also attentive and great to work with. Thank you.
The mounts work perfect with the truck bed rack I have on. Thank you for the excellent line of communication. You guys never kept me in the dark. I will ordering from you guys again.
I was wondering if you are able to sell just two extra mounts or do they just come in a set of six.
The color was even better in person. For well, looks well made and was easy to fold up and put into the carrying case. There was a bunch of colored plastic pieces from manufacturing on the mat, but I was able to vacuum it right up so be careful pulling it out.
Although it took a little extra time the delay very of my OVS Truck Topper was great. Good price too!
Fully engaged with customer, helped me get the crossbar I needed on time!
Product worked out great for my rack setup.
Order was delayed due to manufacturer delays, but my questions were answered and expectations on timing reset along the way. Cross bars were in perfect condition and work great!
I was in the market for a 3/4 length roof rack for my 4Runner as I wanted an upgrade from the OEM rails but still wanted to retain a somewhat OEM look. I am very happy that I went with the Sherpa Needle. It is a high quality rack with the best install method out of all the racks I looked at. I like that it is designed so you don’t have to deal with a mess of silicone when mounting. It is also nice that the fairing sits just above the roof instead of resting on it so that the paint does not get scratched. I was worried about wind noise because of this but I am happy to say there is no added wind noise at all.
I am also glad I purchased this rack through Live More Outside. I shopped around and they had the best pricing considering I was able to get a discount code, shipping was free, and they don’t charge sales tax. Shipping was prompt and I received the rack sooner than I thought I would.
Overall I am very pleased with this purchase and I will definitely come back to Live More Outside as I continue to build my rig.
By far one of the best customer service! Nathan has been a huge help on any questions and quick to respond! Live more outside is top notch. We are getting ready to hit our first outing with our new RTT. Cant wait to test it out. We also just purchased a 270 awning. I found one on another website but wanted to keep my business with live more outside. Nathan price matched and beat their price! We will continue to keep our business with this company!
What customers think about the store
Store excels in customer service with responsive owner Nathan who provides personalized support, price matching, and fast communication. Offers competitive pricing, quick delivery, and wide selection of outdoor/camping products. Customers praise product qualit...